Types of emergency generators

Learn how portable, inverter and standby emergency generators differ, what fuel each one uses, and how to match a generator to your home's needs.

9 min read0 views
— · 0 votes
Contents
  1. Portable generators for temporary power
  2. Inverter generators and clean power
  3. Standby generators that start on their own
  4. Fuel types and what they demand
  5. Matching generator size to the load
  6. Safety and placement rules
  7. Choosing between the types
  8. Keeping a generator ready between outages
  9. Questions about emergency generator types
  10. What are the main types of emergency generators?
  11. Is an inverter generator better for electronics than a portable generator?
  12. Can a portable generator power a whole house?
  13. What fuel do standby generators use?
  14. Where should an emergency generator be placed?
  15. Who should install a standby generator?

Emergency generators fall into a few clear types: portable generators you roll out when the power fails, inverter generators that deliver clean power quietly, and standby generators that sit outside and start on their own. The type you pick depends on what you need to run, how much fuel you can store, and whether the unit stays put or moves. Fuel choice, from gasoline to propane to natural gas, shapes how each type works in practice.

  • A portable generator is moved into place when needed and powers selected appliances through extension cords or a transfer switch.
  • An inverter generator converts power electronically, which gives steadier output for electronics and lets the engine run at lower speed.
  • A standby generator is installed permanently and starts automatically, but it needs a professional installation and a fuel supply.
  • Fuel type decides how you store energy and how long a unit can run, so match fuel to your storage space and refill options.
  • Size a generator by adding the running watts of the appliances you need, then checking the starting surge for motors.

Portable generators for temporary power

A portable generator is a movable unit with a small engine that you wheel or carry into place when the electricity goes out. These units run on gasoline, propane or sometimes both, and they power appliances through extension cords or a manual transfer switch. Portability is the main advantage, because one unit can serve a home, a worksite or an outdoor event.

Portable generators must sit outdoors and away from windows, doors and vents, since their exhaust contains carbon monoxide. The unit needs level ground, shelter from rain and a cord layout that keeps loads within the outlet ratings. A manual transfer switch lets you feed house circuits safely instead of running cords through doorways.

Fuel storage is the practical limit of a portable generator. Gasoline has a shelf life and needs safe containers and rotation, while propane cylinders store longer but take up space. Check the running watts and the starting surge on the label before you connect a refrigerator, a furnace fan or a sump pump.

Inverter generators and clean power

An inverter generator produces power through an electronic stage that converts the engine output into a steady wave. That design gives sensitive electronics, such as computers and medical devices, a smoother supply than a conventional generator provides. Inverter units also throttle the engine down when the load is light, which reduces noise and fuel use.

Inverter generators come in small sizes for camping and larger sizes for backup use at home. Two matching units can be linked with a parallel kit to raise the total output when a single unit is not enough. The cleaner output does not remove the need to run the unit outdoors and away from living spaces.

Cost per watt tends to run higher for an inverter generator than for a conventional portable unit of the same size. The trade-off is quieter operation and power quality that suits delicate equipment. Check whether the model offers a transfer-switch connection if you plan to tie it into house wiring.

Standby generators that start on their own

A standby generator is installed permanently outside the home and wired into the electrical panel through an automatic transfer switch. When the utility supply drops, the switch disconnects the grid and the generator starts within moments. The unit runs on propane or natural gas, so it draws from a tank or a gas line rather than from cans.

Standby units are sized to carry a whole house or a set of chosen circuits, and the transfer switch decides what gets power. Installation involves gas piping, electrical work and a concrete or composite pad, so a licensed electrician and often a gas fitter are needed. Local rules on permits and clearances apply, and those rules differ by place.

A standby generator needs scheduled maintenance, including oil changes, filter checks and an exercise cycle that keeps the engine ready. Natural gas lines can limit output on some models, so the installer checks the supply pressure. Propane needs a tank large enough for the run you expect and a delivery arrangement.

Fuel types and what they demand

Fuel type shapes storage, refilling and the way you operate an emergency generator. Gasoline is easy to buy but needs fresh supply and careful container storage. Propane stores for long periods in a tank and burns cleanly, though the tank must be refilled or exchanged.

Natural gas comes from a utility line and needs no storage on site, but the supply can fail in the same event that cuts electricity. Diesel suits larger units and long runs, yet it needs treatment against spoilage and careful handling. Dual-fuel and tri-fuel models accept more than one fuel, which gives a fallback when one supply runs out.

Store fuel only in approved containers, away from living space and ignition sources, and never refuel a hot engine. Carbon monoxide kills, so every fuel-burning generator belongs outdoors with exhaust pointed away from openings. A battery-powered carbon monoxide alarm inside the home adds a layer of warning.

FuelStorageRefill approach
GasolineApproved cans, limited shelf lifeBuy and rotate supply
PropaneCylinder or fixed tankExchange, refill or delivery
Natural gasNone on siteUtility line supply
DieselTank with treatmentBulk delivery or cans

Matching generator size to the load

Generator size is set by the appliances you need to run at the same time, not by the size of the house. Add the running watts of each appliance, then add the largest starting surge among motor-driven loads. A refrigerator, a furnace fan and a well pump each draw a surge when they start.

Whole-house coverage needs a larger unit and a transfer switch that manages which circuits run together. A managed approach staggers large loads so a smaller generator can carry them in turn. List the essentials first, such as heat, refrigeration, lighting and medical equipment, then decide what else can wait.

An oversized generator wastes fuel and money, while an undersized one trips breakers or stalls under load. Keep the owner's manual with the unit and record the wattage of each appliance on a label near the panel. An electrician can measure actual loads and confirm the transfer switch rating.

Safety and placement rules

Every fuel-burning emergency generator produces carbon monoxide, an odorless gas that causes injury and death indoors. Run the unit outdoors only, far from windows, doors, garages and vents, and never in a basement or attached shed. Place the exhaust so wind cannot carry fumes back into the house.

Electrical safety matters as much as exhaust safety. Backfeeding a home through a wall outlet can injure utility workers and damage wiring, so use a transfer switch or dedicated inlet. Keep cords rated for the load, inspect them for damage and protect connections from water.

Store fuel away from the generator and from any ignition source, and let the engine cool before refueling. Keep a fire extinguisher rated for fuel fires nearby. Installation of a standby unit and any work inside the electrical panel belongs to a licensed electrician.

Choosing between the types

Portable generators suit short outages and limited loads, and they cost less to buy than installed systems. Inverter generators fit electronics and quieter settings, at a higher price for the same output. Standby generators fit longer outages and hands-off operation, with professional installation and a permanent fuel supply.

The decision turns on how often the power fails, what must keep running and where the unit can sit. A renter may need a portable or inverter unit that moves, while a homeowner planning for repeated outages may prefer a standby system. Fuel availability during a wide outage is a deciding factor for any type.

Plan the maintenance each type needs before you buy. Portable and inverter units need fresh fuel, oil checks and dry storage, while standby units need service visits and exercise cycles. Write the plan down where the household can find it.

  • Portable generator: movable, lower purchase cost, manual setup
  • Inverter generator: clean output, quieter running, higher cost per watt
  • Standby generator: automatic start, installed, permanent fuel supply
  • Fuel choice: matches storage space and refill options
  • Load list: sets the size you need

Keeping a generator ready between outages

An emergency generator only helps when it starts, so a maintenance routine keeps it dependable. Run a portable or inverter unit under load for a short period at intervals the manual sets, and change oil as directed. Store it dry with fuel handled per the manufacturer's instructions.

Standby generators exercise themselves on a schedule set during installation, and the homeowner should watch for fault lights. Clear snow, leaves and debris from the enclosure and the exhaust area. Keep the fuel supply topped up and confirm the delivery arrangement before storm season.

Keep a written start-up checklist with the unit, listing the cords, the transfer switch steps and the appliances to connect first. Note the date of each service and any part replaced. A household that practices the steps once a season handles an outage with less confusion.

Questions about emergency generator types

What are the main types of emergency generators?

The main types of emergency generators are portable generators, inverter generators and standby generators. Portable and inverter units are moved into place when needed, while a standby unit is installed permanently and starts automatically. Each type can run on different fuels, which affects storage and refilling.

Is an inverter generator better for electronics than a portable generator?

An inverter generator gives steadier output than a conventional portable generator, which suits computers and medical devices. The inverter stage converts the engine power into a smooth wave and lets the engine slow down under light loads. Both types still must run outdoors because of exhaust fumes.

Can a portable generator power a whole house?

A portable generator can power a whole house only if its output matches the total load and it connects through a transfer switch. Most portable units are sized for selected circuits rather than an entire home. A managed approach that staggers large appliances lets a smaller unit carry the essentials.

What fuel do standby generators use?

Standby generators run on propane or natural gas, drawn from a tank or a utility line. Propane needs a tank sized for the run you expect and a refill arrangement. Natural gas needs no storage on site, but the supply can fail during the same event that cuts power.

Where should an emergency generator be placed?

An emergency generator belongs outdoors, away from windows, doors, vents and garages, with the exhaust pointed away from the home. Carbon monoxide from any fuel-burning unit can build up indoors and cause injury. A transfer switch keeps the electrical connection safe.

Who should install a standby generator?

A standby generator should be installed by a licensed electrician, often with a gas fitter for the fuel line. The work involves the electrical panel, a transfer switch and gas piping, and permits apply. Portable and inverter units need no installation beyond safe cord use or an inlet connection.

Read next

Latest articles