Shower chair fit problems and how to fix them
Learn how to fix shower chair fit problems by adjusting seat height and depth, checking stability and slipping, and fitting the chair to a tub or shower floor.
Contents
- Set the seat height at the leg
- Check width, depth and stability
- Fit the chair to the shower floor
- Questions about shower chair fit
- Why does my shower chair wobble or slip?
- How do I know the seat height is right?
- Can I adjust a shower chair that is too narrow or too deep?
- Can a shower chair go inside a tub?
Shower chair fit problems come from a chair whose seat height, width or depth does not match the person or the bathing surface. A chair that is too tall tips the hips forward, and one that is too low is hard to stand up from. Loose legs and slick feet cause wobble and slipping on a wet floor. The page explains each fit problem and the steps that correct it.
Set the seat height at the leg
Shower chair seat height sets how easily a person sits down and stands up. The seat is right when the feet rest flat on the floor and the knees bend at about a right angle. A chair with push-button legs adjusts in steps, while a bolt-and-nut leg needs a wrench. Ask a helper to hold the chair steady while you change the leg adjustment on each side.
Check width, depth and stability
Seat depth and width decide how well the body sits inside the chair and how much room the arms have to move. The back of the seat should reach the back of the thighs, and the hips should clear both sides with the arms relaxed. A seat that is too deep pushes the knees and can tip a person forward. A seat that is too narrow rubs the hips, and a wide seat can slide under a person during a transfer.
Fit the chair to the shower floor
Fitting a shower chair to the tub or shower floor starts with the feet and the surface they touch. Non-slip feet hold best on a smooth, level floor, and they lose grip on a sloped shower base or a loose mat. Set all four legs on the floor itself, not on the tub rim, and check that the chair does not rock. A shower chair on a tub floor needs a model built for that curve, and a trained specialist can advise on the part.
Questions about shower chair fit
Why does my shower chair wobble or slip?
A shower chair wobbles because one leg is set to a different height or the floor is not level. Slipping comes from worn or dirty non-slip feet and from a slick shower base. Shorten or lengthen the legs until all four touch the floor at once, and replace a damaged foot. A chair that still slides on a sloped base needs a different model or a specialist's advice.
How do I know the seat height is right?
The seat height is right when the feet rest flat on the floor and the knees bend at about a right angle. The person should reach the floor with the heels without sliding forward on the seat. Adjust the legs one side at a time and check the setting before use. A helper should hold the chair during the test.
Can I adjust a shower chair that is too narrow or too deep?
A shower chair with a fixed seat cannot be adjusted for width or depth. Check the body against the seat, and choose a chair size that lets the hips clear the sides and the back of the seat reach the back of the thighs. Padding or a cushion changes the height, so check the legs again after adding one. A trained specialist can help select a size when the fit is unclear.
Can a shower chair go inside a tub?
A shower chair sits inside a tub only if the model is built for a tub floor. A flat-bottom chair on a curved tub floor rests on too few points and can tip. Place the chair on the tub floor itself, not on the rim or on a loose mat. A specialist can advise on a tub-specific chair and on transfer aids.