# Mitigation in emergency management: definition and examples

Learn what mitigation means in emergency management, how it differs from preparedness, and see clear examples of structural and non-structural measures.

Mitigation in emergency management means acting ahead of a hazard to reduce the harm it can do, rather than waiting to respond once a disaster starts. It covers the lasting steps a household, a workplace or a community takes to limit injury, damage and disruption from hazards such as floods, fires, storms or earthquakes. Mitigation sits inside the wider emergency management cycle, which also covers preparedness, response and recovery, and it is the phase that changes the risk itself. The sections below define it, compare it with preparedness, and give examples you can apply to your own plans. 

## How mitigation reduces risk 

Hazard mitigation lowers the chance that a hazard turns into a disaster, or it lessens the consequences when one does occur. It works on risk reduction by changing either the exposure to a hazard or the vulnerability of what is exposed. Moving a family archive to a high shelf, for example, reduces the loss a flood can cause without preventing the flood. These measures are chosen before an event and stay in place afterward, which is what separates mitigation from a one-time response. 

## Mitigation compared with preparedness 

Mitigation and preparedness are two different parts of the emergency management cycle, and mixing them up weakens a plan. Mitigation changes the physical or planning conditions that create risk, such as reinforcing a roof or choosing a safer storage spot. Preparedness gets people and supplies ready to act when a hazard arrives, such as building a contact list or practicing where to meet. A household needs both: mitigation shrinks the problem, while preparedness helps you manage what remains. 

## Structural and non-structural measures 

Mitigation actions fall into two families, and knowing which one you are using makes planning clearer. Structural measures are physical changes built to resist a hazard, such as anchoring a bookcase, fitting storm shutters or strengthening a roof. Non-structural measures are rules, plans and habits, such as zoning limits, insurance, backup copies of documents and a household decision about where to shelter. Together these examples of mitigation actions cover both the building and the behavior around it. 

## Questions about emergency mitigation 

### What is mitigation in emergency management? 

Mitigation in emergency management is the set of lasting actions taken before a hazard to reduce its harm. It changes exposure or vulnerability so that injury, damage and disruption are smaller when an event occurs. Mitigation is planned in advance and remains in place, unlike a response that begins once a disaster is under way. It applies to households, workplaces and whole communities, not only to official agencies. 

### What is emergency mitigation at home? 

Emergency mitigation at home is any lasting change that makes your household less vulnerable to a hazard. Examples include strapping a water heater, securing tall furniture, storing important papers in a sealed box and keeping copies elsewhere. These steps reduce loss without needing anyone to react during the event. Each action depends on the hazards where you live, so match the measure to the local risk. 

### How does mitigation differ from preparedness? 

Mitigation differs from preparedness because it reduces the risk itself, while preparedness readies people to respond. A reinforced roof or a raised storage shelf is mitigation, since it lowers what a storm can destroy. A contact list, a supply kit or a practiced meeting point is preparedness, since it helps you act once a hazard arrives. The emergency management cycle treats them as separate phases that support each other. 

### What are examples of mitigation in emergency management? 

Examples of mitigation in emergency management include both structural and non-structural measures. Structural measures are physical changes such as anchored shelving, storm shutters or a strengthened roof. Non-structural measures include land-use rules, insurance, document backups and household plans for where to shelter. The right mix depends on the hazards you face and on what you can change ahead of time.
