# Metric to imperial conversion chart for sockets

Read a metric to imperial socket conversion chart with confidence: how millimeter and inch socket sizes compare, how to read wrench sizes, and when to measure.

A metric to imperial conversion chart for sockets pairs each socket size in millimeters with its closest inch equivalent, so you can match a socket or wrench to a fastener when only one measurement is marked. The chart converts millimeters to inches, but it also shows why a close match is not always an exact fit. Reading the numbers correctly keeps a tool conversion job simple and avoids rounding a nut or bolt head. 

## How socket sizes are marked 

Socket sizes appear on the side or base of each socket, stamped in millimeters on metric tools and in fractions of an inch on imperial tools. A conversion chart lists these socket sizes side by side, from small fasteners up to large ones. The chart is a reference for tool conversion, not a promise that a metric socket fits an imperial fastener. Check the stamping on the tool before you rely on the chart. 

## Why close sizes are not exact 

A metric size and its nearest imperial size can differ by a small fraction of a millimeter, which is enough to matter on a tight fastener. That gap can let the socket slip and round the corners of the nut or bolt head. Where a fastener is stuck or damaged, a trained mechanic or technician should remove it rather than a chart match. Choose the size that fits snugly and never force a socket that rocks on the head. 

## Measuring a fastener yourself 

When the head of a fastener carries no marking, measure across the flats of the nut or bolt head with a caliper or a rule. Measure in millimeters and read the imperial equivalent from the chart, or measure in inches and work the other way. Socket sizes describe the distance across the flats, not the thread or the shaft. Confirm the measurement twice before you pick a socket from the chart. 

## Questions about socket conversion charts 

### What does a metric to imperial conversion chart for sockets do? 

A metric to imperial conversion chart for sockets shows each metric socket size next to the closest imperial size. It converts millimeters to inches so you can compare the two sets of socket sizes at a glance. The chart is a guide for tool conversion, and the fit on the fastener decides whether the socket is right. Keep the chart with your tools for quick reference. 

### Can I use a metric socket on an imperial bolt? 

A metric socket can turn an imperial bolt only when the two sizes match closely across the flats. A chart shows the nearest pair, yet the small difference can still cause slipping on a tight or worn head. Test the fit by hand before you apply force, and stop if the socket rocks. A trained technician should handle fasteners that will not move. 

### How do I read wrench sizes on the chart? 

Wrench sizes and socket sizes use the same across-the-flats measurement, so one chart serves both tools. Find the size stamped on your wrench and read across to the size in the other system. The chart lists wrench sizes in millimeters and in fractions of an inch. Mark the pairs you use so the next job is quicker. 

### What if the fastener head has no size marking? 

A fastener head with no marking needs a direct measurement before you choose a socket. Measure across the flats with a caliper and note the result in millimeters or inches. Read the matching size from the chart and pick the socket that fits without play. Measure again if the socket feels loose or will not seat.
