# LED emergency lighting fixtures and components

Understand LED emergency lighting fixtures, from the luminaire and housing to the emergency driver and battery, and how maintained fittings differ.

LED emergency lighting fixtures and components are the light fittings and the internal parts that keep a space lit when the normal power supply fails. A fixture, also called a luminaire, holds the light source, the housing, and the control gear inside one unit. The components that matter are the LED module, the emergency driver, and the battery that feeds the light during an outage. This page explains each part and how it fits together in a self-contained emergency unit. 

## What an emergency luminaire contains 

An LED emergency luminaire combines an LED light source, a housing, and a control circuit in a single assembled product. The housing carries the LEDs and the lens, and it protects the electronics from dust and moisture. A bulkhead luminaire is a sealed, wall or ceiling mounted fitting with a tough cover, and it suits corridors, stairwells, and plant rooms. The luminaire is the finished item you mount, while the parts inside it are the components you replace or check. 

## The role of the emergency driver 

An emergency driver is the electronic circuit that switches the LED to battery power when the mains supply drops. The driver senses the loss of supply, starts the battery output, and limits the current so the LED runs at a safe level. A self-contained emergency unit keeps the driver and the battery inside the fitting itself. A central battery system instead sends power from a remote bank, and the fitting then needs only a compatible driver or inverter. 

## Maintained and non-maintained fittings 

Maintained fittings stay lit all the time, and they continue to light when the mains supply fails. Non-maintained fittings stay dark in normal operation and light only during a power failure. The choice depends on the room: a maintained fitting serves an area that needs light at all hours, such as a switch room or a busy escape route. A non-maintained fitting suits a room that is normally lit by other lamps and needs illumination only in an emergency. 

## Questions about LED emergency lighting 

### What is an LED emergency lighting fixture? 

An LED emergency lighting fixture is a complete light fitting built to run on battery power when the mains supply fails. It contains an LED module, a housing, a driver, and a battery in one assembled unit. The fixture is also called a luminaire, and it is mounted on a wall or ceiling. You buy it as one product rather than as loose parts. 

### What does an LED emergency lighting driver do? 

An emergency driver controls the LED and switches it to battery power when the mains supply is lost. It converts the battery voltage into the current the LED needs and keeps that current steady. The driver also protects the battery from deep discharge during a long outage. A faulty driver stops the fitting from lighting in an emergency, so it is the part to test first. 

### What is an LED emergency lighting luminaire? 

An LED emergency lighting luminaire is the assembled light fitting, including its housing, lens, LED source, and control gear. The word luminaire means the complete unit, while the components are the parts inside it. Mounting a luminaire means fixing it to a wall, ceiling, or surface with the correct bracket. The luminaire is the item a fitter installs and an inspector checks. 

### What is a self-contained emergency lighting unit? 

A self-contained emergency lighting unit keeps its battery, driver, and lamp inside the same housing. Each unit works on its own, so one failure does not affect the other fittings in the building. This design avoids the wiring needed for a central battery bank and simplifies installation. The battery in a self-contained unit needs periodic testing and replacement by a competent person.
