First aid kit contents for workplace, OSHA and construction sites

A plain guide to first aid kit contents for workplaces and construction sites, plus what OSHA and ANSI Z308.1 ask for and how to keep supplies checked.

3 min read0 viewsFirst aid kit contents for workplace, OSHA and construction sites
— · 0 votes
Contents
  1. Contents of a workplace kit
  2. OSHA rules and ANSI Z308.1
  3. Construction site hazards
  4. Workplace first aid kit questions
  5. What should a first aid kit contents list for a workplace include?
  6. Does OSHA require a first aid kit with a set contents list?
  7. What goes in an office first aid kit?
  8. How do I keep a construction site first aid kit ready?

A first aid kit for a workplace or construction site should hold the supplies people need to treat cuts, burns, eye injuries and sudden illness until trained help arrives. The kit contents depend on the hazards of the job, the number of workers and the first aid training your crew holds. This page lists what belongs in a workplace kit, explains the OSHA first aid kit requirements and the ANSI Z308.1 minimum requirements, and shows how to keep the kit stocked and easy to find.

Contents of a workplace kit

A workplace first aid kit holds dressings, bandages, tape, gloves, scissors, a CPR face shield and a way to clean wounds. Add a cold pack, a splinter tool, a thermometer and a blanket so a worker can be kept warm while help is on the way. An office first aid kit can be smaller but still needs gloves, adhesive bandages, gauze and a list of emergency contacts. The workplace first aid supplies should match the injuries the job can cause, so review them after every incident.

OSHA rules and ANSI Z308.1

OSHA first aid requirements sit in 29 CFR 1910.151 and ask an employer to make sure a trained person and first aid supplies are available at each site. OSHA does not publish a fixed contents list, so many employers follow ANSI Z308.1 minimum requirements to show that a kit is adequate. The OSHA first aid kit requirements apply to construction sites as well, and the employer must decide the supplies from the work performed. Keep a written record of that decision and of the employee first aid training your team has completed.

Construction site hazards

Construction site first aid starts with the injuries that trade produces, such as puncture wounds, eye injuries and falls. A construction kit needs a larger gauze supply, heavy tape, a burn dressing, an eye wash and clean water for flushing debris from a worker's eyes. Put the kit where workers can reach it without crossing a hazard, and mark the location so a new crew member can find it. Appoint one person to check the construction site first aid box after each use and at set intervals.

Workplace first aid kit questions

What should a first aid kit contents list for a workplace include?

A first aid kit contents list for a workplace includes gloves, adhesive bandages, sterile gauze, tape, scissors, a CPR face shield and a wound cleaning wipe. Add a cold pack, a blanket, a splinter tool and a way to record the injury. The list should also carry emergency contacts and the name of the person trained in first aid. Check the list against the hazards of the job and replace used items at once.

Does OSHA require a first aid kit with a set contents list?

No, OSHA does not publish a fixed contents list for a first aid kit. The OSHA first aid kit requirements ask the employer to provide supplies that fit the hazards and to have a trained person reachable at each site. Many employers use the ANSI Z308.1 minimum requirements as the reference for an adequate kit. Keep the decision in writing so the kit can be shown during an inspection.

What goes in an office first aid kit?

An office first aid kit needs gloves, adhesive bandages, sterile gauze, tape, scissors and a CPR face shield. Add a cold pack for bumps, a thermometer and a list of emergency contacts. An office first aid kit requirements review should also cover where the kit sits and who checks it. Office work rarely needs a large burn dressing, but a worker with a medical condition may need supplies noted in a plan kept with the kit.

How do I keep a construction site first aid kit ready?

A construction site first aid kit stays ready when one named person checks it after every use and at a set interval. That person replaces used supplies, checks that the eye wash is unopened and confirms the kit is in its marked place. Store the kit away from heat and dust so the dressings stay clean. Record each check so the team can see the kit was last verified.

Read next

Latest articles