Calculate electricity bill from a meter reading

Learn how to turn two meter readings into an electricity bill: find the units used, apply the unit rate and standing charge, and check the result.

6 min read1 views
— · 0 votes
Contents
  1. Start with two dated meter readings
  2. Read the meter in the right unit
  3. Find the units used in the period
  4. Apply the unit rate from your tariff
  5. Add the standing charge and taxes
  6. Check the result against the bill
  7. Use an online bill calculator with care
  8. Questions About Meter Reading Bills
  9. How do I calculate my energy bill from a meter reading?
  10. Can I calculate my electricity bill from a meter reading online?
  11. Why does my calculated bill differ from the supplier's bill?
  12. What is the difference between a meter reading and a unit rate?
  13. Do I need the standing charge to work out my bill?

To calculate an electricity bill from a meter reading, subtract the previous reading from the current one to get the units used. Then multiply those units by your unit rate, add the standing charge for the billing period, and apply any taxes or adjustments on your tariff.

  • Subtract the earlier reading from the later reading to get the energy used in the billing period.
  • Convert the reading to kilowatt-hours before you multiply, using the multiplier printed on the meter.
  • Multiply units used by the unit rate, then add the standing charge and any taxes your tariff lists.
  • Keep each reading with its date so a later bill can be checked line by line.

Start with two dated meter readings

A meter reading only means something when you know the date it was taken. Write down the reading on the first day of the billing period and the reading on the last day, with both dates beside them.

The difference between the two numbers is the energy used during that billing period. If the meter has rolled over to zero, add the meter's maximum value to the smaller number before subtracting.

Record the readings in a log so the numbers are not lost between bills. A dated log also lets you compare one billing period with another when a bill looks wrong.

Read the meter in the right unit

The number on the meter is not always in kilowatt-hours, which is the unit a bill charges for. A kilowatt-hour (kWh) is the energy used by a device rated at one kilowatt running for one hour.

Some meters show hundreds of cubic feet of gas or a raw pulse count, and the bill converts those figures. Look for a multiplier printed on the meter face or shown on the bill, and multiply the reading difference by it.

For a digital meter, press the display button until the register you need appears. Take the reading from the correct register and note whether the meter shows one rate or several.

Find the units used in the period

Units used equals the current reading minus the previous reading, adjusted for any multiplier on the meter. This single figure is the quantity your supplier charges for.

If the meter has several registers for day and night rates, calculate each register separately. Each register then has its own unit rate on the tariff.

Write the units-used figure at the top of your calculation sheet. Everything that follows depends on this number, so check the subtraction once more before you go on.

  • Note the previous reading and its date.
  • Note the current reading and its date.
  • Subtract the previous reading from the current reading.
  • Apply the meter multiplier if one is printed.
  • Split the total by register if the meter has more than one.

Apply the unit rate from your tariff

The unit rate is the price charged for each kilowatt-hour, and it comes from the tariff your supplier applies to your account. Multiply the units used by the unit rate to get the energy charge.

A tariff can have more than one unit rate, such as a lower rate for night use. Apply each rate to the units recorded on that register, then add the results.

Unit rates change, so use the rate that applies to the billing period you are calculating. The rate printed on an old bill may not match the current tariff.

Add the standing charge and taxes

The standing charge is a fixed amount charged for each day of supply, whatever energy you use. Multiply the daily charge by the number of days in the billing period and add it to the energy charge.

Taxes, levies and other adjustments on the tariff are added after the energy and standing charges. Read the bill or tariff sheet to see which ones apply and how each is calculated.

Adding the parts gives the total due for the period: energy charge plus standing charge plus taxes and adjustments. Keep each line separate so a query with the supplier is easy to explain.

Check the result against the bill

A bill you calculate yourself should be close to the supplier's figure when the readings and tariff match. Compare the units used, the unit rate and the standing charge line by line.

A difference can come from an estimated reading, a rate change inside the period or a tax you left out. The supplier's bill states which reading was used, so check that first.

If the supplier used an estimated reading, your own reading can replace it in the next billing period. Send the reading with its date so the account is corrected.

Use an online bill calculator with care

An online bill calculator does the same arithmetic: it takes two readings, the unit rate and the standing charge. Enter the figures from your own tariff rather than a default rate the tool suggests.

Calculators that ask only for units used cannot include your standing charge or local taxes. Add those items yourself to reach the total for the period.

Treat the result as an estimate until it matches the supplier's bill. The tariff sheet from your supplier remains the source for every rate you enter.

Questions About Meter Reading Bills

How do I calculate my energy bill from a meter reading?

Subtract the previous reading from the current reading to get the units used. Multiply those units by your unit rate, add the standing charge for the days in the billing period, and add any taxes on your tariff. The total is your calculated energy bill for that period.

Can I calculate my electricity bill from a meter reading online?

Yes, an online bill calculator can do the arithmetic once you enter two readings, the unit rate and the standing charge. Use the rates from your own tariff sheet, because a calculator's default rate may not match your supplier. Check the result against the actual bill before relying on it.

Why does my calculated bill differ from the supplier's bill?

A calculated electricity bill can differ because the supplier used an estimated reading or a different rate. A rate change inside the billing period or a tax you left out also changes the figure. Compare the units used, the rate and the standing charge line by line to find the cause.

What is the difference between a meter reading and a unit rate?

A meter reading is the number shown on the meter at a point in time, and the difference between two readings gives the energy used. A unit rate is the price charged for each kilowatt-hour of that energy. The reading measures quantity, while the rate sets the price.

Do I need the standing charge to work out my bill?

Yes, the standing charge belongs in the total because it is charged for each day of supply regardless of use. Multiply the daily standing charge by the number of days in the billing period. Add it to the energy charge before you add taxes.

Latest articles